Anderson Furnace Repair FAQ Hub
Direct answers to common homeowner questions about furnace symptoms, safety, repair costs, and referral dispatch.
We are a free local referral service. When you call (317) 942-3206, we connect you directly with an independent, local heating technician serving Anderson and Madison County who handles diagnostics, pricing, and repair.
Common causes include a thermostat fan set to ON instead of AUTO, a clogged air filter tripping the high-limit switch, a coated flame sensor, or a failed hot surface igniter.
Most standard component repairs—such as flame sensors, igniters, or capacitors—range from $120 to $360, while blower motors, control boards, or gas valves typically run $260 to $780 depending on your furnace model and dispatch timing.
Yes. Technicians in our referral network regularly work on both older 80% AFUE gas furnaces in historic West Central and Grandview basements as well as newer 90%+ condensing systems in Pendleton and Edgewood.
Shut off the unit and call immediately if you smell gas, hear a carbon monoxide alarm, notice burning electrical odors, or see soot or yellow flickering flames.
A light dusty odor during the first fall cycle is normal as settled dust burns off the heat exchanger. If the smell is metallic, electrical, or lasts longer than 30 minutes, shut the system off and call for inspection.
Check 1-inch pleated filters every 30 days during heavy winter heating and replace them at least every 60–90 days—or more often if you have pets or older ductwork.
A cracked heat exchanger is a serious carbon monoxide hazard. While heat exchangers can sometimes be replaced—especially if under manufacturer warranty—on furnaces over 15 years old, replacement is often more practical.
Independent technicians serve all of Anderson (46011, 46012, 46013, 46016, 46017) plus Edgewood, Chesterfield, Pendleton, Lapel, Frankton, and Alexandria.
Still troubleshooting? Read our cold air guide, check our cost calculator, or visit the Anderson furnace repair homepage.